Brass & Copper Push Fit Fittings

Copper Pipe FittingsCopper is used as it can tolerate very high temperatures and as such, is used widely for central heating applications Different types of FittingsAdaptersAdapters are used to extend runs, or to simply change the connection type at the end of a pipeBushingsBushings are used to join pipes of different sizes, usually by reducing a larger fitting down to a smaller pipe.CouplingsA coupling is used to extend the run of a pipe, or change pipe sizes ElbowsIf you need to change the direction of flow, elbows are likely your best bet. Produced primarily in 90 and 45 degree angles (unique sizes like 22.5 and 60 are also available), elbows can be threaded or sweated, and are one of the most crucial fittings used in plumbingTeesWhen more than one branch is required of a water supply, tees are the way to go. Essentially a long coupling with an outlet on the side, these fittings feature their outlets at 90° from the inlet, and are sized according to their "run" (the horizontal, or straight-through dimension of the fitting), and the side outlet (the "top" of the fitting, 90 degrees off the run). When the run of a tee is smaller than the side outlet, it's often referred to as a "bull head" fitting.Caps and PlugsA cap, as its name suggests, is a cap that goes over the end of a pipe, creating a dead end. Plugs also stop up a pipe or tube system, but are plugged, like a stopper, into the end of the pipe.Cross type FittingCross type fittings contains 4 opening in 4 directions. These are connected when there are 4 pipes are meeting at a point.

...
Read more Read less

Filters

Viewing 1 - 20 of 31 products
Results per page
Description Price Fitting Direction Fitting Type Material Push Fit Pipe Size Threaded Connection Threaded Tee Connection Demountable Connection Gender Tee Gender Thread Size Thread Size Tee Thread Standard Thread Standard Tee
RS Stock No. 712-6749
Mfr. Part No.65206
PHP631.11
Each
units
Straight Coupler Brass 15mm 1/2 in G Female - Yes - Female 1/2in - G -
RS Stock No. 199-2360
Mfr. Part No.15MC(1/2)BRASS
BrandJohn Guest
PHP560.30
Each
units
Straight Coupler Brass 15mm 1/2 in BSP Male - Yes - Male 1/2in - BSP -
RS Stock No. 712-6746
Mfr. Part No.65121
PHP508.93
Each
units
Straight Coupler Brass 22mm - - Yes - - - - - -
New
RS Stock No. 200-6944
Mfr. Part No.C6RG2-35
PHP251.348
Each (In a Box of 6)
units
Straight Tap Connector Bronze - - - - - - - - - -
RS Stock No. 340-6754
Mfr. Part No.PM22WB
PHP1,171.17
Each
units
90° Wall Plate Elbow Adapter Brass 22mm - - - - - 3/4in - BSP -
RS Stock No. 712-6764
Mfr. Part No.65840
PHP938.32
Each
units
- Branch Tee Brass 15mm - 1/2 in G Female Yes Female - - 1/2in - G
RS Stock No. 712-6742
Mfr. Part No.65866
PHP284.43
Each (In a Pack of 2)
units
- End Stop Brass 15mm - - Yes - - - - - -
New
RS Stock No. 200-6946
Mfr. Part No.C5-1BR921
PHP259.468
Each (In a Box of 5)
units
Straight Tap Connector Brass - - - - - - - - - -
RS Stock No. 712-6727
Mfr. Part No.65114
PHP308.94
Each (In a Pack of 2)
units
Straight Coupler Brass 15mm - - Yes - - - - - -
New
RS Stock No. 200-6924
Mfr. Part No.BT11
PHP480.988
Each (In a Box of 10)
units
Straight Tap Connector Brass - - - - - - - - - -
New
RS Stock No. 200-6912
Mfr. Part No.C4-1BR1125
PHP362.25
Each (In a Box of 4)
units
Straight Tap Connector Brass - - - - - - - - - -
RS Stock No. 840-5696
Mfr. Part No.SB0154E
BrandSharkbite
PHP4,024.03
Each
units
Straight Coupler Brass 54mm - - Yes - Female - - - -
RS Stock No. 712-6718
Mfr. Part No.65936
PHP629.55
Each
units
- Draining Tap Brass 15mm - - Yes - - - - - -
RS Stock No. 712-6768
Mfr. Part No.65874
PHP428.00
Each
units
- End Stop Brass 22mm - - Yes - - - - - -
RS Stock No. 712-6724
Mfr. Part No.65666
PHP536.17
Each
units
- Equal Tee Brass 15mm - - Yes - - - - - -
RS Stock No. 340-6760
Mfr. Part No.MM051504N
PHP426.707
Each (In a Pack of 3)
units
Straight Stem Adapter Brass 15mm 1/2 in R Male - - - Male 1/2in - R -
RS Stock No. 712-6777
Mfr. Part No.65292
PHP969.62
Each
units
Straight Taper Coupler Brass 22mm 3/4 in R Male - Yes - Male 3/4in - R -
RS Stock No. 712-6720
Mfr. Part No.65496
PHP761.07
1 Pack of 2
Pack(s)
90° Street Elbow Brass 15mm - - Yes - - - - - -
RS Stock No. 340-6748
Mfr. Part No.PM15WB
PHP1,006.27
Each
units
90° Wall Plate Elbow Adapter Brass 15mm - - - - - 1/2in - BSP -
RS Stock No. 712-6770
Mfr. Part No.65676
PHP840.44
Each
units
- Equal Tee Brass 22mm - - Yes - - - - - -
Related Products
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessoriesSuitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many ...
Chromium plated brass fittings. Type A fittings suitable ...
Description:
Chromium plated brass fittings. Type A fittings suitable for mechanically joining metric o/d tubing in accordance with: Copper tube to BS2871: Part 1: Table X Table Z. Stainless steel tube to BS4127: Part 2: 1972.For suitable chromium plated copper tubeBS864/2 ...
Chromium plated brass fittings. Type A fittings suitable ...
Description:
Chromium plated brass fittings. Type A fittings suitable for mechanically joining metric o/d tubing in accordance with: Copper tube to BS2871: Part 1: Table X Table Z. Stainless steel tube to BS4127: Part 2: 1972.For suitable chromium plated copper tubeBS864/2 ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...