Related Products
HSCo drill for small diameter drilling in most ...
Description:
HSCo drill for small diameter drilling in most materials up to x2.5 diameter. All drills supplied on 1mm shank. Manufactured to DIN1899 Standards.
High grade solid carbide PCB drills, drills remain ...
Description:
High grade solid carbide PCB drills, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and avoid breakage. These drill bits are fitted ...
High grade solid carbide PCB drills with 1/8 ...
Description:
High grade solid carbide PCB drills with 1/8 inch (3.17 mm) diameter shank, drills remain sharp for much longer than standard steel drills when drilling epoxy glass PCB laminates. A high speed is recomended to produce good quality holes and ...
To use: Strip approximately 25 mm of insulation ...
Description:
To use: Strip approximately 25 mm of insulation from the wire using cutting blade in centre of tool and insert into the wrapping bit bend the wire 90°, place bit over the terminal pin and commence wrapping by turning the ...