Ferrite Beads

"

Ferrite Beads also known as ferrite chokes are passive devices and they are used to constrict high-frequency signals in electronic components. The ferrite becomes resistive over its intended frequency range and uses up the noise energy in the form of heat.

How do the ferrite beads work?

The ferrite bead is connected in series with the power supply rail and is often combined with the capacitors to ground on either side of the bead. This then forms a low-pass filter network, further reducing the high-frequency power supply noise. Use SPICE (Simulation Program with Integrated Circuit Emphasis) or another similar tool to ensure any anti-resonance peaks caused by ferrite or PCB inductive structure does not violate the target impedance limit.

Ferrite Beads come in two categories:

High-Q Beads - typically used as resonators and must not be used in power isolation circuits

Low-Q Beads - these are also called absorptive beads and they are lossy and make good filter networks because they are designed to absorb high-frequency noise currents and dissipate it as heat

What to consider when choosing Ferrite Beads?

Make sure that any voltage drop does not cause the target supply rail to fall below the recommended operating conditions of the device

The ferrite bead is inductive, therefore do not use it with High-Q decoupling capacitors

Applying ferrite beads correctly can be an effective and inexpensive way to reduce high-frequency noise and switching transients

Where are Ferrite Beads used?

Eliminating high-frequency EMI noise on any circuit design

Electronic devices such as mobile phones

Computers and laptops

TV tuners

Audio Players

DVDs

Gaming Systems

"

...
Read more Read less

Filters

Viewing 1 - 20 of 1198 products
Results per page
Description Price Package Type Impedance at 25 MHz Impedance at 100 MHz Impedance at 300 MHz Impedance at 500 MHz Impedance at 1 GHz Current Rating Type Dimensions Length Depth Height Diameter Application
RS Stock No. 167-4806
Mfr. Part No.BLM31PG601SH1L
BrandMurata
PHP5.459
Each (On a Reel of 3000)
units
1206 (3216M) - 600Ω - - - 1.5A Chip Ferrite Bead 3.2 x 1.6 x 1.1mm 3.2mm 1.6mm 1.1mm - EMI Suppression Filter, Power Supplies
RS Stock No. 839-0825
Mfr. Part No.BLM31PG601SH1L
BrandMurata
PHP9.40
Each (In a Bag of 10)
units
1206 (3216M) - 600Ω - - - 1.5A Chip Ferrite Bead 3.2 x 1.6 x 1.1mm 3.2mm 1.6mm 1.1mm - EMI Suppression Filter, Power Supplies
RS Stock No. 724-1380
Mfr. Part No.BLM18PG121SN1D
BrandMurata
PHP2.578
Each (In a Pack of 25)
units
0603 (1608M) - 120Ω - - - 2A Chip Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - EMI Suppression Filter, Power Supplies
RS Stock No. 124-1518
Mfr. Part No.7427504
PHP39.919
Each (In a Pack of 20)
units
Axial 702Ω 773Ω - - - 3A Ferrite Bead 6 (Dia.) x 10mm - - 10mm 6mm Digital Devices, PCB, Radio Frequency Interferences, Text Processing
RS Stock No. 724-1605
Mfr. Part No.BL01RN1A1D2B
BrandMurata
PHP6.537
Each (In a Pack of 25)
units
Axial - - - - - 7A EMI Suppression 3.6 (Dia.) x 5mm 5mm - 5mm 3.6mm -
RS Stock No. 239-589
Mfr. Part No.BL01RN1A1F1J
BrandMurata
PHP10.189
Each (In a Pack of 10)
units
Axial - - - - - 7A Bead 3.6 (Dia.) x 5mm 5mm - - 3.6mm General Electronics
RS Stock No. 125-3159
Mfr. Part No.BL01RN1A1D2B
BrandMurata
PHP3.959
Each (On a Reel of 500)
units
Axial - - - - - 7A EMI Suppression 3.6 (Dia.) x 5mm 5mm - 5mm 3.6mm -
RS Stock No. 888-3484
Mfr. Part No.28B1225-000
PHP47.628
Each (In a Pack of 50)
units
1225 68Ω 140Ω 270Ω - - - Cylindrical EMI Core 31.12 x 15.93mm 15.93mm - - 31.12mm EMI Suppression
RS Stock No. 125-3150
Mfr. Part No.BLM18PG471SN1D
BrandMurata
PHP1.078
Each (On a Reel of 4000)
units
0603 (1608M) - 470Ω - - - 1A Chip Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - EMI Suppression, Power Supplies
RS Stock No. 724-1425
Mfr. Part No.BLM18PG471SN1D
BrandMurata
PHP2.578
Each (In a Pack of 25)
units
0603 (1608M) - 470Ω - - - 1A Chip Ferrite Bead 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - EMI Suppression Filter, Power Supplies
RS Stock No. 144-9788
Mfr. Part No.742792040
PHP8.644
Each (On a Reel of 4000)
units
805 - 600Ω - - - 2A Ferrite Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - Anti EMI, Control Signals, DC/DC Converter, Fast Bus Signals, HDD, High Current, High Frequency, High Speed, Line Filter, LVDS, Power Supply, RS232, RS422, USB 2.0
RS Stock No. 124-1839
Mfr. Part No.742792040
PHP10.809
Each (In a Pack of 50)
units
0805 (2012M) - 600Ω - - - 2A Ferrite Bead 2 x 1.2 x 0.9mm 2mm 1.2mm 0.9mm - Anti EMI, Control Signals, DC/DC Converter, Fast Bus Signals, HDD, High Current, High Frequency, High Speed, Line Filter, LVDS, Power Supply, RS232, RS422, USB 2.0
RS Stock No. 167-3807
Mfr. Part No.BLM15AX102SN1D
BrandMurata
PHP1.137
Each (On a Reel of 10000)
units
0402 (1005M) - 1000Ω - - - 350mA Chip Ferrite Bead 1 x 0.5 x 0.5mm 1mm 0.5mm 0.5mm - EMI Suppression Filter, General Use
RS Stock No. 144-9838
Mfr. Part No.74279263
PHP6.899
Each (On a Reel of 4000)
units
0603 - 220Ω - - - 500mA EMI Suppression 1.6 x 0.8 x 0.8mm 1.6mm 0.8mm 0.8mm - Suppression Components
RS Stock No. 166-9616
Mfr. Part No.BL01RN1A2A2B
BrandMurata
PHP4.528
Each (In a Bag of 500)
units
Axial - - - - - 7A EMI Suppression 3.6 (Dia.) x 5mm 5mm - 5mm 3.6mm -
RS Stock No. 839-0819
Mfr. Part No.BLM18KG300TN1D
BrandMurata
PHP1.89
Each (In a Bag of 100)
units
0603 (1608M) - 30Ω - - - 5A Chip Ferrite Bead 1.6 x 0.8 x 0.6mm 1.6mm 0.8mm 0.6mm - EMI Suppression Filter, Power Supplies (Low DC Resistance Type)
RS Stock No. 792-6192
Mfr. Part No.BLM15AX102SN1D
BrandMurata
PHP3.038
Each (In a Bag of 25)
units
0402 (1005M) - 1000Ω - - - 350mA Chip Ferrite Bead 1 x 0.5 x 0.5mm 1mm 0.5mm 0.5mm - EMI Suppression Filter, General Use
RS Stock No. 124-1517
Mfr. Part No.7427502
PHP65.856
Each (In a Pack of 20)
units
Axial 670Ω 976Ω - - - 3A Ferrite Bead 6 (Dia.) x 10mm 10mm - 10mm 6mm General Electronics
RS Stock No. 122-5299
Mfr. Part No.BLA31AG221SN4D
BrandMurata
PHP9.547
Each (On a Reel of 4000)
units
1206 (3216M) - 220Ω - - - 150mA Bead 3.2 x 1.6 x 0.8mm 3.2mm 1.6mm 0.8mm - General Electronics
RS Stock No. 172-9954
Mfr. Part No.2743002112
BrandFair-Rite
PHP6.292
Each (On a Reel of 4500)
units
Axial 88Ω 133Ω - - - - Bead 3.5 (Dia.) x 8.9mm 8.9mm - - 3.5mm EMI Suppression
Related Products
The BLM series of ferrite beads from Murata ...
Description:
The BLM series of ferrite beads from Murata do not require a ground connection and are ideal for use in circuits with unstable ground lines. At noise frequencies, these ferrite beads are designed to function nearly as resistors, leaving signal ...
BLM series ferrite beads from Murata do not ...
Description:
BLM series ferrite beads from Murata do not require a ground connection and are ideal for use in circuits with unstable ground lines. Excellent solder heat resistance is provided by the nickel barrier construction of the external electrodes. These ferrite ...
These filters are designed to act as resistors ...
Description:
These filters are designed to act as resistors to electronic noise frequencies.Limit the possibility of resonance.Do not generate distortion.Designed for high-speed data transmission lines.
Chip ferrite beads designed to function as nearly ...
Description:
Chip ferrite beads designed to function as nearly as possible in a resistive fashion at noise frequencies, greatly reducing the possibility of resonance and leaving signal waveforms undistorted. EIA 0805 package size (metric 2012)No ground connection requiredNickel barrier terminations for ...