Ceiling Lights

A ceiling light is an electrical fitting containing a lamp or light bulb to provide an artificial light source in a room. Ensuring a workplace has adequate illumination is essential for employee health and safety. Substandard or insufficient lighting can lead to various complaints including eye-strain, headaches and fatigue. On the opposite end of the scale, too much light can also cause the same problems. Both can result in quality issues, low productivity and sometimes accidents can occur.


What ceiling light is best for me?


There are various types of ceiling fixture available, choosing the best one for an installation depends on a few key factors.


  • Natural light: Make the best use of existing natural light. Ensure that all windows and skylights are kept clean to allow as much natural light is utilised.

  • Application: Make sure that the correct type of ceiling lighting is installed for the job at hand. An office environment requires different lighting to a clothing factory containing sewing machines and fabric matching tables.

  • Positioning: Care must be taken when installing ceiling lighting. The correct positioning of lighting ensures that employees can safely carry out their daily tasks and not put themselves under any unnecessary strains.

  • Environment: Must ceiling light be Anti-corrosive or IP44 rated or above.

Whether you are installing office lighting, garage lighting, LED or fluorescent, industrial ceiling lights are the most likely. Some additional points to consider are;


Mounting type


  • Recessed or flush ceiling light: Enables the lamp to be mounted flush into the ceiling.

  • Surface mount: A simple way of fixing single or twin batten fluorescent or LED fixtures to the ceiling.

  • Pendant: A type of fitting that suspends the lamp a short distance from the ceiling.

  • Dimmable: Must the lighting be dimmable? If so extra ballasts and switching components must be used.

  • Diffusers: Used to spread and soften the light.

Colour Temperature


Colour temperature refers to a scale that measures the type of colour or hue that a lamp emits. The colour temperature scale is measured in Kelvins (K). The higher the K number the cooler the lamp. The lower the K number the warmer the lamp.


  • 2500K Extra warm white.

  • 2700K Warm white.

  • 3000K Warm white / White.

  • 3500K White.

  • 4000K Cool white.

  • 6500K Daylight.

...
Read more Read less

Filters

Viewing 1 - 20 of 234 products
Results per page
Description Price Type Length Width Depth Wattage Number of Lamps Colour Tone Lamp Type Colour Temperature Lamp Size Life Hours Colour Reference Voltage Rating Anti-corrosive
RS Stock No. 795-9788
BrandRS PRO
PHP7,249.77
Each
units
Twin Batten 1.27 m 140 mm 100 mm 24 W 2 Cool White LED 4500K - - - - Yes
RS Stock No. 851-2933
BrandRS PRO
PHP1,197.17
Each
units
Twin Batten 610 mm 104 mm 75 mm 28 W 2 - Fluorescent - T5 - - 230 V No
RS Stock No. 918-1120
BrandRS PRO
PHP6,850.57
Each
units
Batten 1.791 m 61 mm 64 mm 75 W 1 Cool White LED 4000K T12 - - - No
RS Stock No. 851-3052
BrandRS PRO
PHP669.565
Each (In a Pack of 2)
units
Diffuser 1219 mm - - - 1 - Fluorescent - T5 - - - No
RS Stock No. 851-3028
BrandRS PRO
PHP1,174.52
Each
units
Twin Batten 574 mm 63 mm - 28 W 2 - Fluorescent - T5 - - 230 V No
RS Stock No. 918-1379
BrandRS PRO
PHP3,227.11
Each
units
Single Batten 1.524 m 85 mm - 22 W 1 Daylight LED 5000K T8 - - 230 V No
RS Stock No. 795-9791
BrandRS PRO
PHP10,984.86
Each
units
Twin Batten 1.565 m 140 mm 100 mm 40 W 2 Cool White LED 4500K - - - - Yes
RS Stock No. 125-6916
BrandRS PRO
PHP2,942.37
Each
units
Twin Batten 615 mm 95 mm 85 mm 20 W 2 - LED - T8 - - 230 V ac -
RS Stock No. 125-6914
BrandRS PRO
PHP4,932.90
Each
units
Single Batten 1.79 m 60 mm 85 mm 30 W 1 - LED - T8 - - 230 V ac -
RS Stock No. 851-3059
BrandRS PRO
PHP831.345
Each (In a Pack of 2)
units
Diffuser 610 mm - - - 1 - Fluorescent - T5 - - - -
RS Stock No. 851-2936
BrandRS PRO
PHP1,655.41
Each
units
Twin Batten 1.21 m 104 mm 75 mm 56 W 2 - Fluorescent - T5 - - 230 V No
RS Stock No. 851-3046
BrandRS PRO
PHP2,334.89
Each
units
Twin Batten 1.475 m 63 mm - 94 W 2 - Fluorescent - T5 - - 230 V No
RS Stock No. 851-2918
BrandRS PRO
PHP984.03
Each
units
Single Batten 610 mm 65 mm 75 mm 14 W 1 - Fluorescent - T5 - - 230 V No
RS Stock No. 918-1114
BrandRS PRO
PHP4,244.70
Each
units
Batten 1.527 m 61 mm 64 mm 40 W 1 Cool White LED 4000K T8 - - - No
RS Stock No. 851-3018
BrandRS PRO
PHP1,417.19
Each
units
Single Batten 1.475 m 63 mm - 35 W 1 - Fluorescent - T5 - - 230 V No
RS Stock No. 125-6917
BrandRS PRO
PHP4,649.15
Each
units
Twin Batten 1.225 m 95 mm 85 mm 40 W 2 - LED - T8 - - 230 V ac -
RS Stock No. 851-3002
BrandRS PRO
PHP819.82
Each
units
Single Batten 575 mm 63 mm - 14 W 1 - Fluorescent - T5 - - 230 V No
RS Stock No. 145-5912
BrandRS PRO
PHP1,778.34
Each
units
Batten 610 mm - - 20 W - Cool Daylight LED 6000K - 30000h - 100 → 277 V Yes
RS Stock No. 125-6920
BrandRS PRO
PHP8,440.69
Each
units
Twin Batten 1.79 m 95 mm 85 mm 60 W 2 - LED - T8 - - 230 V ac -
New
RS Stock No. 188-4683
BrandRS PRO
PHP7,030.00
Each
units
Twin Batten 1.563 m 129 mm 90 mm 116 W 2 - Fluorescent - T8 - - 230 V Yes
Related Products
This Thorlux Lighting General purpose aluminium bulkhead is ...
Description:
This Thorlux Lighting General purpose aluminium bulkhead is a high quality, British made product, with die cast aluminium body and frame. It can be wall mounted or ceiling mounted and is ideal in applications such as walkways, loading bays, entrances, ...
The introduction of this LED panel is part ...
Description:
The introduction of this LED panel is part of the Ledvance luminaire family providing greater efficiency through integrated LED lighting. The LED panel is the ideal upgrade of existing fluorescent installations. Greater energy savings and low maintenance costs with an ...
The introduction of this damp proof LED luminaire ...
Description:
The introduction of this damp proof LED luminaire is part of the Ledvance luminaire family providing greater efficiency with a contemporary modern look. This luminaire is the ideal upgrade of existing fluorescent installations. Greater energy savings and low maintenance costs ...
This RS Pro linear LED batten boasts an ...
Description:
This RS Pro linear LED batten boasts an ultra-low profile, with a high lumen output. Manufactured from an impact resistant Aluminium body and Polycarbonate diffuser creates this batten as a versatile lightweight and robust light fixture. The surface-mounted LED linear ...