Indicator Lampholders

Indicator lampholders are support indicator lights within a lighting fixture and link them to the electrical circuit. These holders or sockets hold the bulbs and enable electrical contact to provide the bulbs with power to switch on, switch off or flash at pre-determined intervals. They also allow the lights to be easily removed, switched out or replaced.


What are indicator lampholders used for?

Indicator lampholders are most commonly found within the automotive industry, where they are used to secure the bulbs of brake lights, turning signal lights, warning gauge lights and ignition status lights.

In the industrial and manufacturing sectors, indicator lampholders are used with equipment or machinery status indicator or warning lights. They are an integral part of the safety and emergency measures within plants and factories.

Types of indicator lampholders

Indicator lampholders are categorised in terms of their different attributes, including:

  • Mounting types, such as PCB (printed circuit board) or panel mount.
  • Termination types, such as soldered, wire lead or screwed.
  • Base formats, such as bayonet, screw in, candelabra or wedged.

...
Read more Read less

Filters

Viewing 1 - 20 of 117 products
Results per page
Description Price Lampholder Type Lamp Type Lamp Base Termination Type Diameter Length Lamp Size Panel Hole Diameter Panel Thickness Mounting Type Power Rating Series Voltage Rating
RS Stock No. 438-9515
BrandRS PRO
PHP146.87
Each
units
- - BA9 Solder Tag 10.3mm 20 mm - - - - - - -
RS Stock No. 811-642
BrandRS PRO
PHP42.022
Each (In a Pack of 5)
units
PCB Mount - Wedge PCB Pin 10mm 14.5 mm T3 1/4 - - - - - -
RS Stock No. 589-783
BrandRS PRO
PHP81.418
Each (In a Pack of 5)
units
Panel Mount - BA9 - 17.7mm 19 mm - 14.5mm - Panel Mount - PE12 150 V
RS Stock No. 811-715
BrandRS PRO
PHP63.774
Each (In a Pack of 5)
units
PCB Mount - Wedge Solder Tag 5mm 14 mm T1 - 1.5mm - - - -
RS Stock No. 206-536
BrandRS PRO
PHP25.524
Each (In a Pack of 5)
units
- LED BA9s, E10 - 10mm 42 mm 10 mm - - - - - -
RS Stock No. 589-777
BrandRS PRO
PHP64.278
Each (In a Pack of 5)
units
Panel Mount - E10 - 17.7mm 13.25 mm - 14.5mm - Panel Mount - PE12 150 V
RS Stock No. 811-664
BrandRS PRO
PHP49.804
Each (In a Pack of 5)
units
PCB Mount - Wedge - - 12 mm - - - - - - -
RS Stock No. 210-793
BrandRS PRO
PHP18.942
Each (In a Pack of 5)
units
- LED - - 11mm 21 mm - - - - - - -
RS Stock No. 237-0519
Mfr. Part No.A104800AAC
PHP69.54
Each
units
Panel Mount LED Screw In Wire Leads 9.5mm 14.5 mm 5 mm 8 5.5mm - - - -
RS Stock No. 237-0525
Mfr. Part No.A1048OAAAC
PHP113.84
Each
units
Panel Mount LED Screw In Wire Leads 9.5mm 15.5 mm 5 mm 8mm 5.5mm - - - -
RS Stock No. 171-2596
Mfr. Part No.OR1206
BrandOrbitec
PHP46.769
Each (In a Pack of 10)
units
PCB Mount - BA9s PCB Pin - - - - - PCB Mount - 0664 -
RS Stock No. 890-4773
Mfr. Part No.080-0901-05-303
BrandDialight
PHP2,399.78
Each
units
- - Candelabra Screw Flush Screw 25.4mm 50.8 mm S6 - - Panel Mount 75W 080 6 → 250 V
RS Stock No. 890-4739
Mfr. Part No.047-3101-29-301
BrandDialight
PHP2,299.687
Each (In a Pack of 33)
units
- - Candelabra Screw Screw 25.4mm 42.1 mm S6 - - Panel Mount 75W 047 125 V
RS Stock No. 237-0553
Mfr. Part No.A105000AAD
PHP132.29
Each
units
Panel Mount LED Screw In Wire Leads 10mm 16.9 mm 5 mm 8mm 7mm - - - -
RS Stock No. 890-6773
Mfr. Part No.508-7538-504
BrandDialight
PHP994.60
Each
units
Datalamp Holder - - Solder Cup 7.9mm 21.2 mm - - - Panel Mount - 508 -
RS Stock No. 835-7644
Mfr. Part No.APW-199
BrandIdec
PHP884.02
Each
units
Panel Mount LED - Screw 29mm 41.5 mm - 22.3mm 1 → 6mm - - - -
RS Stock No. 890-5228
Mfr. Part No.370-8738-504
BrandDialight
PHP1,173.34
Each
units
Datalamp Holder - - Turret - - - - - Panel Mount - 370 -
RS Stock No. 171-2580
Mfr. Part No.OR1204
BrandOrbitec
PHP35.641
Each (In a Pack of 10)
units
PCB Mount - E10 PCB Pin - - - - - PCB Mount - 0666 -
RS Stock No. 237-0547
Mfr. Part No.A105000AAB
PHP127.32
Each
units
Panel Mount LED Screw In Wire Leads 10mm 16.9 mm 5 mm 8mm 7mm - - - -
RS Stock No. 890-5079
Mfr. Part No.177-8430-09-503
BrandDialight
PHP948.86
Each
units
- - Midget Flange Solder - 15.9 mm T1 3/4 - - Panel Mount - 177 -
Related Products
A range of lamp holders and sockets from ...
Description:
A range of lamp holders and sockets from JKL Components, designed for automotive-type LED lamps. They are suitable for use in replacement LED lamp applications. This range of sockets include; wedge based, bi-pin, G-4 and screw based. Available in PCB ...
Supplied complete with adaptors to enable either T1 ...
Description:
Supplied complete with adaptors to enable either T1 LES or T1 Miniature Flange lamp to be used.,White glass-loaded nylon body.,Polycarbonate lens provides a uniformly illuminated area. The chrome-plated bezel is connected to one side of the lamp but is fully ...
The nickel plated brass body is supplied with ...
Description:
The nickel plated brass body is supplied with an insulation washer, solder tag, fixing nut and washer. Electrical connections are made via the solder tag and body return.,The caps incorporate a nickel plated brass screw with polycarbonate fresnel lens. The ...
877 Series,The nickel plated brass body is supplied ...
Description:
877 Series,The nickel plated brass body is supplied with a solder tag, fixing nut and washer. Electrical connections are made via two insulated solder terminals.The caps construction is a nickel plated brass screw with polycarbonate transparent fresnel lens. The lens ...