Rack Cable Management

What is rack cable management?
Rack cable management covers a range of products used to manage and organise network cables within a server rack cabinet.

Why do you need cable management?
This range of 19” rack accessories prevents any cables from accidentally being unplugged or pulled out of servers and protects the integrity of your network. Sprawling cables can also be a trip hazard.

Organising your cables enables you to easily and quickly make changes to existing rack servers, maintain your hardware or install new hardware. You can do all of this without having to unplug anything or navigate through tangled cables.

Typical Solutions
Cable organiser
A cable organiser, sometimes referred to as a cable manager, cable carrier or cable tidy can be horizontal or vertical. They help to bundle and route cables. This provides easy access to the cables and you can easily identify cables within the bundle. Many cable tidies feature rings that cables can be fed through, helping you to keep cabling neat. The rings can be made from plastic, metal or velcro. Cable managers offer extra support to cables, preventing strain and enhancing the lifespan of your network cables.

Cable Tray
Cables can be rested on cable trays and routed around the server cabinet. These do not normally have a ring or loop like cable managers, but are often have gaps or vents that help to prevent overheating.

Cable Entry Panel
A cable entry panel sometimes called a cable entry seal or brush strip seal is an additional way of protecting your network hardware. Cables are run through the opening of the panel which prevents dust and dirt from entering the data cabinet with the cable. They contain a brush that removes contaminants and prevents contaminants from entering the server cabinet. Some feature an internal latch that cannot be opened without a key. This means that even if you use a cable entry seal, the integrity of a sealed cabinet is not compromised in any way.

Cable Management Arm
Cable management arms can be attached to the racking within your server cabinet. They provide you with enough cable slack to pull running equipment out of a 19 inch rack without the need to unplug or remove any cables. Cable management arms can help to remove the stress on cables, enhancing their lifespan. They tend to be hinged or bent to offer flexibility to be used with different racking. Some are compatible with square hole racks or round hole racks, whereas some models are suitable for both types.

...
Read more Read less

Filters

Viewing 1 - 20 of 31 products
Results per page
Description Price Type Dimensions For Use With Material Height U Number of Rings
RS Stock No. 249-5573
BrandRS PRO
PHP1,713.43
Each
units
Cable Management Panel - 19-Inch Rack - 1U 4
RS Stock No. 802-0291
BrandRS PRO
PHP522.34
Each
units
Cable Entry Panel 483 mm x 9 mm x 2 Uin 2U Rack Unit Steel 2U -
RS Stock No. 802-0285
BrandRS PRO
PHP897.97
Each
units
Cable Entry Panel 483 mm x 10 mm x 1 Uin 1U Rack Unit Steel 1U -
RS Stock No. 738-8685
BrandRS PRO
PHP573.91
Each
units
Cable Entry Seal 337 x 78 x 10mm 19-Inch Rack PP - -
RS Stock No. 243-1866
BrandRS PRO
PHP2,041.26
Each
units
Cable Entry Panel - 19-Inch Panel Steel 2U -
RS Stock No. 446-920
BrandRS PRO
PHP195.75
Each
units
Cable Tidy 75 x 75 x 22mm 19-Inch Panel Mount, 800 mm Wide Cable Channel Nylon - -
RS Stock No. 447-115
BrandRS PRO
PHP155.31
Each
units
Cable Tidy 62 x 42 x 22mm 19-Inch Panel Mount, 800 mm Wide Cable Channel Nylon - -
RS Stock No. 738-8681
BrandRS PRO
PHP619.21
Each
units
Cable Entry Seal 337 x 78 x 10mm 19-Inch Rack PP - -
RS Stock No. 802-0289
BrandRS PRO
PHP1,294.86
Each
units
Cable Entry Panel 483 mm x 10 mm x 2 Uin 2U Rack Unit Steel 2U -
RS Stock No. 446-926
BrandRS PRO
PHP208.29
Each
units
Cable Tidy 122 x 62 x 22mm 19-Inch Panel Mount, 800 mm Wide Cable Channel Nylon - -
RS Stock No. 447-103
BrandRS PRO
PHP300.51
Each
units
Cable Tidy 80 x 40 x 26mm 19-Inch Panel Mount, 800 mm Wide Cable Channel Nylon - -
RS Stock No. 802-0298
BrandRS PRO
PHP523.55
Each
units
Cable Entry Panel 483 mm x 9 mm x 1 Uin 1U Rack Unit Steel 1U -
RS Stock No. 447-119
BrandRS PRO
PHP414.56
Each
units
Cable Tidy 120 x 60 x 28mm 19-Inch Panel Mount, 800 mm Wide Cable Channel Nylon - -
RS Stock No. 397-1949
BrandRS PRO
PHP641.05
Each
units
Cable Hoop - 600 or 800 mm Wide Cabinet Steel - -
RS Stock No. 839-0067
Mfr. Part No.854-09233 WMB1H
PHP2,474.46
Each
units
Cable Organiser Single Sided 482.6 x 76.2 x 76.2mm Cable Management Plastic 2U -
RS Stock No. 839-0055
Mfr. Part No.854-09207 THCO1
PHP1,587.03
Each
units
Cable Organizer with Metal Ring - Cable Management - 1U -
RS Stock No. 779-4137
Mfr. Part No.AR8429
BrandAPC
PHP2,681.47
Each
units
Cable Organiser 483 x 44 x 15mm InfraStruXure, ISX Racks Steel - -
RS Stock No. 839-0064
Mfr. Part No.THCO2
PHP2,247.39
Each
units
Cable Organizer with Metal Ring - Cable Management Steel 2U -
RS Stock No. 826-2852
Mfr. Part No.5502255
BrandRittal
PHP1,909.13
Each
units
Cable Entry Panel 390 mm x 20 mm x 1 Uin Enclosure Type TS IT Steel 1U -
RS Stock No. 826-2843
Mfr. Part No.7111900
BrandRittal
PHP470.042
Each (In a Pack of 10)
units
Cable Shunting Ring - TS IT Cabinet Carbon Steel - -
Related Products
TE Connectivity 24 port 1U 19" drawer style ...
Description:
TE Connectivity 24 port 1U 19" drawer style ST-Style multimode fibre optic patch panel prefitted with a fusion splice holder, 2 cable management saddles and 2 cable glands (PG13.5 and PG16) that allow fibre counts from 4 to 24 in ...
The E1060 has an IP66-rated front and built-in ...
Description:
The E1060 has an IP66-rated front and built-in support for alarm-handling, Multilanguage and recipe management. Communication ports for RS232/422/485 are built-in and can also connect via USB or Ethernet. The panels are equipped with bright TFT displays and offer resolutions ...
The Access range offers an innovative 'Open Architecture' ...
Description:
The Access range offers an innovative 'Open Architecture' construction which removes the need for corner posts and enabling the rapid removal of all panels and doors to completely expose the open frame for unhindered installation of cables &/or equipment. Vertical ...
These cable supports are designed for neat and ...
Description:
These cable supports are designed for neat and tidy cable management onto telescopic units and subracks. RoHS compliant. Load carrying capacity 2kgExtension length 730mmRequired space in retracted state 25mm 16mm2 steel tube, zinc-platedCable mounting with cable ties.