Cable Moulded Parts

Filters

Viewing 61 - 80 of 262 products
Results per page
Description Price Type Inside Diameter Primary Inside Diameter Secondary Adhesive Lined Material Number of Breakouts Shrink Temperature Colour Minimum Operating Temperature Maximum Operating Temperature Shrunk Diameter Primary Shrunk Diameter Secondary Series Standards Met
RS Stock No. 180-553
Mfr. Part No.202C621-50-0
PHP1,549.80
Each
units
Straight Cable Boot 22.4mm 17.8mm No Polymer 1 - - -55°C +150°C 11.7mm 8.1mm - -
RS Stock No. 420-776
Mfr. Part No.901-10278
PHP678.50
Each
units
Straight Cable Boot 25mm 9mm No Fluid Resistant Elastomer 1 +135°C Black -75°C +150°C 14mm 3.5mm - -
RS Stock No. 718-2907
Mfr. Part No.202K163-12-01-0
PHP3,717.53
Each
units
Straight Cable Boot 42mm 21mm No Fluoroelastomer 1 - Black -55°C +200°C 28.2mm 9.9mm - -
RS Stock No. 170-1350
Mfr. Part No.202A153-3-0
PHP1,093.58
Each
units
Straight Cable Boot 36mm - No Polyolefin 1 - Black -75°C +150°C 8.6mm - - -
RS Stock No. 314-6991
Mfr. Part No.6810-207-2001-2-250
BrandDeutsch
PHP70.82
Each
units
Boot - - - Santoprene 1 - Black - - - - IMC 200 -
RS Stock No. 170-1417
Mfr. Part No.222A111-3-0
PHP785.93
Each
units
Straight Cable Boot 17.8mm - No Polyolefin 1 - Black -75°C +150°C 3.8mm - - -
RS Stock No. 718-3297
Mfr. Part No.202K132-100/86-0
PHP1,911.00
Each
units
Straight Cable Boot 30mm 15mm Yes LFH Polyolefin 1 - - -30°C +105°C 14.2mm 5.9mm - -
RS Stock No. 176-9072
Mfr. Part No.222S174-25C-0
PHP10,734.40
Each
units
Cable Boot 47mm 36mm Yes Elastomer - - Black -75°C +150°C 35.1mm 15.8mm 222S174 -
RS Stock No. 837-2476
Mfr. Part No.202K185-25L-0
PHP1,408.05
Each
units
Cable Boot 44.5mm 16.8mm - Fluid Resistant Elastomer 1 - Black -75°C +150°C - - - -
RS Stock No. 299-6111
Mfr. Part No.102L048-37/239CS163
PHP435.05
Each
units
End Cap 75mm - Yes Polyolefin - - Black -40°C +85°C 32mm - - -
RS Stock No. 811-2757
Mfr. Part No.CSCAK/1
Brand3M
PHP2,651.57
Each
units
Cable Abandonment Kit - - - Rubber - - Black - - 12mm - - -
RS Stock No. 218-1369
Mfr. Part No.301A022-25-0
PHP1,360.28
Each
units
T Joint Cable Boot 13.2mm 13.2mm No Fluid Resistant Elastomer 2 - Black - - 6.9mm 6.9mm - -
RS Stock No. 420-750
Mfr. Part No.901-10370
PHP1,449.14
Each
units
Right Angle Cable Boot 43mm 43mm No Fluid Resistant Elastomer 1 +135°C Black -75°C +150°C 28.5mm 10mm - -
RS Stock No. 178-7461
Mfr. Part No.44666
BrandAmphenol
PHP553.46
Each
units
Sealing Sleeve - - No Neoprene 7 - Black -40°C +85°C - - - -
RS Stock No. 724-2472
Mfr. Part No.DT6P-BT-BK
BrandDeutsch
PHP63.242
Each (In a Bag of 5)
units
Receptacle Cable Boot - - - Plastic 1 - Black -28.88°C +100°C - - - -
RS Stock No. 837-2473
Mfr. Part No.222K132-25L-0
PHP1,056.30
Each
units
Cable Boot - - - Fluid Resistant Elastomer 1 - Black -75°C +150°C - - - -
RS Stock No. 167-9562
Mfr. Part No.317-1399-000/ENDGEHÄUSE SURE SEAL SS4+3POL
BrandITT Cannon
PHP842.63
Each
units
Cable Boot 19.05mm 12.7mm No - 1 - - -40°C +105°C - - - -
RS Stock No. 829-0153
Mfr. Part No.401-04024 104-4-G-PO-X-BK
PHP508.60
Each
units
Cable Boot 16.5mm 16.5mm - Fluid Resistant Elastomer 1 +135°C Black -75°C +150°C 7.9mm 3.8mm - -
RS Stock No. 829-0248
Mfr. Part No.411-82001 1182-4-G-PO-X-BK
PHP1,125.70
Each
units
Cable Boot 12mm 6mm - Fluid Resistant Elastomer 1 +135°C Black -75°C +150°C 7.6mm 2mm - -
RS Stock No. 718-2913
Mfr. Part No.202K163-25-01-0
PHP1,389.15
Each
units
Straight Cable Boot 43mm 43mm No Fluid Resistant Elastomer 1 - - -75°C +150°C 28.2mm 9.9mm - -
Related Products
Heatshrink connector terminal housing, straightThe inner lip guarantees ...
Description:
Heatshrink connector terminal housing, straightThe inner lip guarantees increased strain reliefFor use with circular connectors to VG standardProtects against environmental influences.
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
Developed to meet the increased requirements for safety ...
Description:
Developed to meet the increased requirements for safety and reliability in the automotive field these sealed connectors satisfy all of the parameters defined by automotive/industrial standards covering such areas as vibration, shock, salt water spray, industrial gas, low millivolt drop ...
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...