Pressure Sensors

Pressure sensors are devices that sense the applied pressure of gases or liquids. The output of the measurement is then converted into an electrical signal which reflects the amount of pressure applied.


There are various different technologies used within pressure sensors. Depending on the requirements, this can influence their sensing accuracy and reliability. When the mechanical displacement within the sensor is turned into an electrical output signal there are 5 ways this can happen.


Resistive - These types of sensors use the change in electrical resistance of a strain gauge connected to the diaphragm.


Capacitive - Are highly sensitive and are able to measure low-pressure under 10 bar while still withstanding large overloads.


Piezoelectric - These sensors use substances like Quartz to generate a charge on the surface when pressure is applied. Piezoelectric pressure sensors are ideal for measuring fast changing pressures.


Optical - These use interferometry to measure pressure changes in optical fibre. They are not disturbed by EMI and can be used in noisy or medical environments.


MEMS - This stands for micro-electro-mechanical system and contains capacitive or piezo pressure sensing mechanisms on silicon at micron level resolution.


Types of Pressure Sensors


Within the sensors, there are various properties which can be used to classify them. This includes what pressure range they measure, their operating temperature range or the pressure type they measure.


Absolute Pressure Sensor - This type of sensor measures pressure relative to the perfect vacuum (zero reference point).


Gauge Pressure Sensors - These are often used to measure atmospheric pressure and are sometimes referred to as relative pressure sensors.


Sealed Gauge Pressure Sensor - Similar to a gauge pressure sensor except they measure pressure relative to a fixed pressure, not the current ambient atmospheric pressure which can vary.


Differential Pressure Sensors - These can be used to measure the difference between two different pressures (differential pressure) which can be connected to either side of the sensor. They are often used to measure pressure drops, fluid levels and flow rates.


Pressure Sensor Applications


Pressure sensors are used in many applications in a large range of industries. These include medical, aviation, automotive and marine.


...
Read more Read less

Filters

Viewing 81 - 100 of 1028 products
Results per page
Description Price Pressure Reading Type Minimum Pressure Reading Maximum Pressure Reading Accuracy Output Type Media Measured Process Connection Analogue Output Electrical Connection Communication Protocol Response Time Maximum Current Supply Voltage Interface
RS Stock No. 102-4128
BrandRS PRO
PHP15,988.00
Each
units
Gauge -1bar 24bar ±0.25 % Analogue Gas, Liquid BSP 1/4 4 20 mA DIN 46350 Connector - - - 9 32 V dc -
RS Stock No. 175-5015
BrandRS PRO
PHP11,919.32
Each
units
Gauge 0bar 750mbar ±0.25 % Analogue - BSP 1/4 0 5 V M12 Connector - - - 9 32 V dc -
RS Stock No. 175-5037
BrandRS PRO
PHP8,225.39
Each
units
Gauge 0psi 30psi ±0.25 % Analogue - NPT 1/4 0 5 V M12 Connector - - - 9 32 V dc -
RS Stock No. 797-5030
BrandRS PRO
PHP10,912.93
Each
units
Gauge 0bar 25bar ±0.25 % Voltage Air, Gas, Hydraulic Fluid, Liquid, Water BSP 1/4 0 5 V DIN 43650 Connector - - - 9 32 V dc -
RS Stock No. 175-4992
BrandRS PRO
PHP8,225.39
Each
units
Gauge 0bar 25bar ±0.25 % Analogue - BSP 1/4 4 20 mA DIN 43650 - - 20 mA 9 32 V dc -
RS Stock No. 175-5010
BrandRS PRO
PHP11,919.32
Each
units
Gauge 0bar 250mbar ±0.25 % Analogue - BSP 1/4 4 20 mA M12 Connector - - 20 mA 9 32 V dc -
RS Stock No. 123-5244
BrandRS PRO
PHP33,462.98
Each
units
Gauge 0mbar 100mbar ±0.25 % Analogue Air, Hydraulic Fluid, Liquid, Non-Aggressive Gas, Oil, Water G1/4 0 5 V, 4 20 mA Battery - - - - -
RS Stock No. 102-4143
BrandRS PRO
PHP23,296.96
Each
units
Gauge 0bar 50bar ±0.25 % Analogue Grey Water, Sewage, Viscous Fluid BSP 3/4 4 20 mA M12 4-pin - - 28 mA 12 28 V dc -
RS Stock No. 102-4152
BrandRS PRO
PHP23,296.96
Each
units
Absolute 0bar 10bar ±0.25 % Analogue Grey Water, Sewage, Viscous Fluid BSP 3/4 4 20 mA M12 4-pin - - 28 mA 12 28 V dc -
RS Stock No. 175-4991
BrandRS PRO
PHP8,225.39
Each
units
Gauge 0bar 16bar ±0.25 % Analogue - BSP 1/4 0 5 V DIN 43650 - - - 9 32 V dc -
RS Stock No. 123-5248
BrandRS PRO
PHP33,462.98
Each
units
Gauge 0mbar 1000mbar ±0.25 % Analogue Air, Hydraulic Fluid, Liquid, Non-Aggressive Gas, Oil, Water G1/4 0 5 V, 4 20 mA Battery - - - - -
RS Stock No. 175-4996
BrandRS PRO
PHP8,225.39
Each
units
Gauge 0bar 250bar ±0.25 % Analogue - BSP 1/4 0 5 V DIN 43650 - - - 9 32 V dc -
RS Stock No. 175-5034
BrandRS PRO
PHP9,235.60
Each
units
Gauge 0psi 15psi ±0.25 % Analogue - NPT 1/4 4 20 mA M12 Connector - - 20 mA 9 32 V dc -
RS Stock No. 175-5046
BrandRS PRO
PHP8,225.39
Each
units
Gauge 0psi 300psi ±0.25 % Analogue - NPT 1/4 4 20 mA M12 Connector - - 20 mA 9 32 V dc -
RS Stock No. 828-5723
BrandRS PRO
PHP10,971.41
Each
units
Gauge 0mbar 500mbar <±0.25 % Voltage Oil, Water BSP 1/4 0.5 4.5 V DIN 43650 Connector - - 6 mA 9 32 V dc -
RS Stock No. 175-5003
BrandRS PRO
PHP9,235.60
Each
units
Gauge -1bar 9bar ±0.25 % Analogue - BSP 1/4 4 20 mA DIN 43650 - - 20 mA 9 32 V dc -
RS Stock No. 828-5818
BrandRS PRO
PHP12,387.75
Each
units
Gauge -1bar 9bar <±0.25 % Current Sewage, Viscous Fluid, Water G3/4 4 20 mA M12 Connector - - 28 mA 9 32 V dc -
RS Stock No. 102-4149
BrandRS PRO
PHP23,296.96
Each
units
Absolute 0bar 1bar ±0.25 % Analogue Grey Water, Sewage, Viscous Fluid BSP 3/4 4 20 mA M12 4-pin - - 28 mA 12 28 V dc -
RS Stock No. 175-5039
BrandRS PRO
PHP8,225.39
Each
units
Gauge 0psi 75psi ±0.25 % Analogue - NPT 1/4 0 5 V M12 Connector - - - 9 32 V dc -
RS Stock No. 828-5791
BrandRS PRO
PHP12,387.75
Each
units
Gauge 0bar 5bar <±0.25 % Voltage Sewage, Viscous Fluid, Water G3/4 0 10 V M12 Connector - - 6 mA 14 32 V dc -
Related Products
Schneider Electric XMLA pressure switches for control circuits ...
Description:
Schneider Electric XMLA pressure switches for control circuits are used to control the pressure of hydraulic oils, fresh water, sea water, air, steam, corrosive fluids, or viscous products. The XMLA pressure and vacuum switches have a fixed differential and are ...
RS Pro IPSS ATEX industrial pressure transducers are ...
Description:
RS Pro IPSS ATEX industrial pressure transducers are suitable for use in a wide range of industrial applications. A piezoresistive ceramic sensor gives excellent media compatibility within a stainless steel housing.An incorporated microprocessor-based amplifier, requiring no adjusting, gives stable electronics, ...
These miniature Surface Mount Technology (SMT) Low Pressure ...
Description:
These miniature Surface Mount Technology (SMT) Low Pressure Sensors are small, cost effective devices intended for use with wet/wet differential sensing. Based on the long established reliability and accuracy of the single in-line package, the SMT version’s smaller configuration reduces ...
The PS-A series of pressure sensors have a ...
Description:
The PS-A series of pressure sensors have a built-in amplifier and compensating circuit and focus on high-level precision.Typical applications include industrial (pressure switches, pneumatic devices), medical (blood pressure monitors, compressed air pressure measurement, air beds) and water level detection for ...