Motor protection is used to prevent damage to an electrical motor and to reduce the incidence of problems such as internal faults and abnormal conditions. The type of motor protection you choose will depend on the size of motor you need it for and the voltage level required.
What does motor protection do?
Motor protection units protect against various types of damage that can occur within a motor, such as problems arising from vibration or excess torque. Motor protection units also take care of other mechanical limitations like startup frequency management, and control operating characteristics like voltage, phases and short-circuit current availability.
What is motor protection used for?
Motor protection is mainly used to manage and protect synchronous and asynchronous motors. They can also be used for circuit-breakers (devices used for stopping the electric current as a safety measure) and motors in a variety of drive applications, such as motor drives for pumps, fans, compressors, mills and crushers.
Description:
Sirius 3RM1 motor starters are compact 22.5 mm
wide devices that combine various functions in a single enclosure.They consist of combinations of relay contacts, power semiconductors (hybrid technology), and an electronic overload relay for switching induction under normal operating conditions. ...
Description:
The TeSys U is a modular system for
motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection ...
Description:
Compact non-isolated motor speed control modules for dc.
shunt wound and permanent magnet field motors. DIN rail mountingSuitable for 110//120 or 220/240V single phase ac. supplies (switch selectable)Fully isolated heatsinkControl signals available for zero speed, drive health and speed trimAdjustable ...
Description:
The UT 6-TMC thermomagnetic circuit breakers ensure high
system availability with the ability to re-connect with a clear status indication. They become integrated in the CLIPLINE complete system via the plug-in bridge shaft and can be clearly allocated with the ...
