Thermal Adhesives

Thermal adhesives are a type of adhesive commonly used to attach a heatsink to electronic components. The glue is typically a two part epoxy resin which cures to form a strong bond. They are thermally conductive and usually electrically insulating, helping to dissipate heat from the device to prevent overheating or a breakdown.

The main function of a thermal adhesive is to ensure there is no air space between which would act as a thermal insulator. It fills in the microscopic imperfections on the heatsink and device.

There are a variety of thermal compound adhesives available that are ideal for eliminating the air gap under a heat sink. The most common types of thermally conductive adhesives are:

  • Thermal paste
  • Thermal glue
  • Thermal adhesive tape
  • Thermal Grease
  • Thermal Gap Pads

Applications

Thermal adhesives are used in a variety of industries and applications such as:

  • Heat sink bonding
  • Potting/encapsulating sensors
  • BGA die heat spreader interface
  • Chip scale packages
  • Power semiconductors

...
Read more Read less

Filters

Viewing 1 - 6 of 6 products
Results per page
Description Price Trade Name Type Product Material Package Type Package Size Thermal Conductivity Cure Time Maximum Operating Temperature Minimum Operating Temperature Chemical Composition Dielectric Strength Odour Operating Temperature Range Physical Form
RS Stock No. 503-357
BrandRS PRO
PHP513.39
Each
units
- Thermal Conductive Compound Non-Silicone Syringe 35 ml 0.65W/mK - +130°C -40°C Zinc Oxide 40kV/mm No Characteristic -40 → +130 °C Paste
RS Stock No. 458-783
Mfr. Part No.AS1803
PHP2,768.62
Each
units
AS1803 Thermal Conductive Adhesive Silicone Cartridge 310 ml 1.55W/mK 8 h +220°C -50°C - - - -50 +220 °C -
RS Stock No. 725-9971
Mfr. Part No.TCER75S
PHP3,148.24
Each
units
- Thermal Conductive Adhesive Ethoxy Syringe 75 ml 1.8W/mK 24 h +230°C -50°C - - - -50 → +230 °C -
RS Stock No. 725-9975
Mfr. Part No.TCOR75S
PHP2,997.38
Each
units
- Thermal Conductive Adhesive Metal Oxide Syringe 75 ml 1.8W/mK 24 h +230°C -50°C - - - -50 → +230 °C -
New
RS Stock No. 193-1151
Mfr. Part No.GF400 50ml
PHP5,267.49
Each
units
- Thermal Conductive Adhesive Silicone Cartridge 50 ml 4W/mK 12 h @ 25 °C +200°C -50°C - 9kV/mm - -50 → +200 °C Liquid
RS Stock No. 118-1368
Mfr. Part No.SMA10SL
PHP1,688.34
Each
units
- Thermal Conductive Adhesive Epoxy Syringe 10 ml 0.25 → 0.3W/m°C 30 Min (90 °C), 40 min (120 °C) +130°C -40°C - - - -40 → +130 °C -
Related Products
TPM550 features high thermal conductivity of 5.5 W/m.K ...
Description:
TPM550 features high thermal conductivity of 5.5 W/m.K and becomes workable at approximately 45°C. The material’s advanced formulation ensures minimal contact thermal resistance. Like TPM350, TPM550 also produces no mess due to its thixotropic characteristics which prevent flow outside of ...
The LA ICK series heatsinks stand out due ...
Description:
The LA ICK series heatsinks stand out due to the following characteristics:. Particularly high-quality designIntegrated fan (12 V), allowing a very low height profile17 x 17 pin matrix suitable for processor 80486Fan motor with dual ball bearing mounted axis, ensuring ...
Durable adhesive labels made form a thick material ...
Description:
Durable adhesive labels made form a thick material designed to replace engraved plastic plates. Cost effectiveCan replace engraved plastic platesAdditional label holder not necessaryHigh performance adhesive and compressible foam backing - optimal adhesion to uneven surfacesRounded corners ensure long term ...
Two part polyurethane resin potting and encapsulating compound ...
Description:
Two part polyurethane resin potting and encapsulating compound supplied in handy 250g ’duo-sachet’ pack for easy mixing and pouring with no mess. Quick setting, flame retardant and thermally conductive encapsulant designed for general purpose use. The cured product is particularly ...