Conductive Adhesives

Conductive adhesives are a type of liquid that can be applied to create a thin and flexible layer of highly electrical conductive material to an area or device.How do they work?The liquid itself will contain different conductive adhesives such as iron, copper, gold etc and will disperse these equally in the form of a polymer resin. The resin can be applied to several different areas of use and will help make repairs for instance.Different types of containers:Brush – A simple brush will be attached to the underneath of the lid or completely removable. The brush can then be used to apply smooth amounts of the adhesive to any surface area making it practical on all kinds of surfacesSyringe – A Syringe may come with your adhesive and can be used for tight to reach places. If you need to inject amounts into corners or holes, a syringe is perfect for this type of job.Features and benefits:Thin film means only a small amount has to be used, making it very cost effectiveDries at room temperatureAdhesion to several different types of materialsGreat electrical conductionLow surface resistanceGrey or silver colouringDifferent bottle sizes available for different scale jobsEasy to storeLightweight and smallLow odourQuick drying timesLiquid and solids availableWhere might I use some?Electroplating pre coatsContact surfacesPotentiometer tracksEarthing StripsCircuit boardsUsed instead of soldering in some cases

...
Read more Read less

Filters

Viewing 1 - 4 of 4 products
Results per page
Description Price Product Type Conductive Element Package Type Package Size Cure Time Applicator Type Dielectric Strength Maximum Operating Temperature Minimum Operating Temperature Odour Operating Temperature Range Physical Form Specific Gravity Thermal Conductivity
RS Stock No. 220-9928
Mfr. Part No.9703 - 33X25
Brand3M
PHP13,121.03
Each
units
Transfer Tape Silver Roll 25mm x 33m - - - +85°C -40°C - -40 → +85 °C - - -
RS Stock No. 918-5009
Mfr. Part No.8330S-21G
PHP5,902.56
Each
units
Epoxy Silver Syringe 21 g 60 min Syringe - +150°C -40°C - -40 → +150 °C Solid 3.56 1.748W/mK
RS Stock No. 918-5021
Mfr. Part No.8329TCS-50ML
PHP6,225.10
Each
units
Epoxy Carbon Tub 50 ml 20 min - 7.5kV/mm +200°C -70°C Slight -70 → +200 °C Liquid 2.41 1.44W/mK
RS Stock No. 918-5012
Mfr. Part No.8329TCS-6ML
PHP1,312.80
Each
units
Epoxy Carbon Syringe 6 ml 20 min Syringe 7.5kV/mm +200°C -70°C Slight -70 → +200 °C Liquid 2.41 1.44W/mK
Related Products
When using these tapes galvanic compatibility should be ...
Description:
When using these tapes galvanic compatibility should be taken into account. Conductive flexible aluminim coated foilConductive synthetic resin glueSelf adhesive, highly conductive release tapeEasy applicationHigh shielding effectivenessOperating Temperature -25 to +85ºCApplications in EMI-Protection of doors and ...
TPM550 features high thermal conductivity of 5.5 W/m.K ...
Description:
TPM550 features high thermal conductivity of 5.5 W/m.K and becomes workable at approximately 45°C. The material’s advanced formulation ensures minimal contact thermal resistance. Like TPM350, TPM550 also produces no mess due to its thixotropic characteristics which prevent flow outside of ...
Q-Sil 553 is 2-component, addition-cure, thermally conductive silicone ...
Description:
Q-Sil 553 is 2-component, addition-cure, thermally conductive silicone elastomer system. It has been specially designed for electronic assembly potting applications. The fully cured elastomer offers good protection against shock, vibration and environmental contamination and is UL 94V0 approved. The twin ...
The ACC Silicones 75ml white silicone adhesive is ...
Description:
The ACC Silicones 75ml white silicone adhesive is a fast cure one-part RTV silicone sealant, specially formulated for applications requiring a combination of good adhesion, excellent physical and non-corrosive properties. This Oxime based cure system produces excellent physical properties and ...