- RS Stock No.:
- 197-7646
- Mfr. Part No.:
- TWIM 15/230V
- Manufacturer:
- SKF
4 In Global stock for delivery. NCR Plus within 10 working day(s), rest of PH within 14 working days
9 In Global stock for delivery. NCR Plus within 10 working day(s), rest of PH within 14 working days
Added
Price Each
PHP226,549.34
(exc. VAT)
PHP253,735.26
(inc. VAT)
Units | Per Unit |
1 - 4 | PHP226,549.34 |
5 + | PHP219,752.86 |
- RS Stock No.:
- 197-7646
- Mfr. Part No.:
- TWIM 15/230V
- Manufacturer:
- SKF
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- NL
Product Details
SKF Bearing Heater, 20 mm to 320 mm Bore Size - TWIM 15/230V
This portable induction heater from SKF can be used to heat up and expand roller bearings so that you can install them on a shaft with ease. The lightweight construction and a built-in handle make it simple to transport. Two power settings let you heat up sensitive components more slowly, avoiding the risk of structural damage. For convenience, the heater's software will detect the bearing's size and position. The inner and outer rings are heated independently, reducing the risk of internal tensions.
Portable and convenient heating of bearings
Automatic temperature monitoring
Maximum bore size of 320 mm
Minimum bore size of 20 mm
Supply voltage of 230 V
Temperature control range of 20˚C to 200˚C
Does not magnetise
No support yokes required
Automatic temperature monitoring
Detects bearing size and heats appropriately
Two power levels and three power configurations
User-friendly LED control panel
Quiet operation
Automatic temperature monitoring
Maximum bore size of 320 mm
Minimum bore size of 20 mm
Supply voltage of 230 V
Temperature control range of 20˚C to 200˚C
Does not magnetise
No support yokes required
Automatic temperature monitoring
Detects bearing size and heats appropriately
Two power levels and three power configurations
User-friendly LED control panel
Quiet operation
Application Information
Machine assembly
When should I use this portable induction bearing heater?
Use this heater when fitting a bearing sized between 20 mm and 320 mm onto a shaft.
How do I use the heater?
Place the bearing on the heater, attach the magnetic temperature probe to the inner ring and press start. Protective gloves are essential for removing the heated bearing.
Specifications
Attribute | Value |
---|---|
Supply Voltage | 230V |
Maximum Bore Size | 320mm |
Minimum Bore Size | 20mm |